Small & Medium Business Telecommunication Solution.
A Cellbris UniCall System is a
next generation Cellular GSM Gateway, also known as Remote Gateway, that provides integrated communication solutions which enables savings of up
to 80% of SMB communication expenses.
Cellbris UniCall unit is a multi-user (up to 50 users) system which contains among
with Remote Extension feature several features such as CallBack and Dual
SIM GSM Gateway.
Cellbris UniCall system resides on regular analog extension, allowing
saving trunk for PSTN line.
The
system supports the following modes*:
-
Mobile Remote
Extension Mode
(Callthrough/CallBack) – This is the main function of the device, this
function allows to access your low cost routing from your PTT/IP.
Enjoy all the benefit of your PBX from a mobile.
-
Abroad Mode (Callback) – Access low cost routing from your home
country. Make calls from mobile phones abroad via Cellbris UniCall.
While abroad, user can receive a call to
his mobile as well as to any local line (fixed/mobile) phone.
-
GSM Gateway Mode
- UniCall is the only system offering support of two mobile operators
from a single set. The Cellbris system working in GSM Gateway Mode
enables people at the office to call mobile phones at the same price
as if they were calling from within the respective cellular
communication network.
-
Follow Me Mode (optional )- When not at office, all calls to your office can
be redirected to your or any other company's mobile phone for free.
- Global Office (optional) - UniCall connects offices via cellular
line, simply dial to extension where UniCall box resides, hear dial
tone, dial short extension of another office, get connected (requires VPN or Cheap Destination plan)
- Virtual PTT (optional) - looking to have regular PTT line
at the "hard to reach" locations, but do not want to "dig the ground"?
Place one UniCall on regular PTT line where it is available and link
it to another UniCall device located at the place where you need a
telephone line. PTT line will be virtually extended via cellular line
(this is a stand alone function).
Remote Extension Mode (CallThrough):
- Call the unit from authorized number. The unit identifies your Phone ID. Your phone will connect to PBX Extension. Call as usual from your PBX Extension.
This feature should be used only if you have VPN Plan, Family Plan or
any other cheap destination plan of cellular provider.
Remote Extension Mode (CallBack):
- Call the unit from a registered number. The unit identifies your Phone ID and disconnects the line. The unit immediately calls you back. When answering the call your phone will connect to PBX Extension. Now you can call as you normally would from your PBX Extension.
Abroad Mode (CallBack by SMS):
- Send SMS with password to the unit. The unit identifies your Phone ID and password and immediately calls you back. When answering the call your phone will connect to PBX Extension. Now you can call as you normally would from your PBX Extension.
- Same as above except that you can send SMS to the unit with password and destination number. After identification, unit calls to number specified in the SMS message, assuming the number dialed is a local line, this option saves your mobile roaming incoming expenses.
- Same as above with ability to specify second number in SMS message, unit , after calling first number and detecting an answer calls to second specified number. This option,
for example, allows to make a call from public phones abroad with no DTMF support.
Abroad Mode (OneTouch™):
- Call desired phone number through the unit from your mobile. The unit identifies your
phone through authentication code and disconnects the line. The unit immediately calls you back. When answering the call,
you will be automatically connected to desired number (requires one
time
update of phone entries).
Follow Me Mode:
- All calls to your office or to specific extension at your office
can be transferred to any company's mobile phone. Utilizing VPN
Plan, Family Plan or any other cheap destination plan of cellular
provider, this call will be very cheap or totally free of charge.
Gateway Mode:
- Extension calls
the unit. Unit answers providing GSM line (dial tone). Internal Extension calls to GSM mobile offering GSM to GSM direct connection.
Depending on prefix of dialed number unit can route the call to one of
the GSM networks installed in the unit (1-2 networks).
Global Office:
- Extension calls
the unit. Unit answers providing GSM line (dial tone). Internal Extension calls to
another office via short predefined number (ex. 326).
Depending on prefix (ex. 3), unit routes the call to relevant UniCall
unit that resides in another office, second unit answers the
call, the call is routed to the relevant extension (26).
Main Features of Cellbris UniCall System:
- High quality sound.
- Support for up to 50 users per unit (upgradeable)
- One key redial support .
- Unlimited calls without disconnecting (### key)
- User usage limitation (minutes per month) with SMS "low minutes" notification.
- Real time clock with optional detailed billing (per request).
- Full Remote Management and Programming; COM/USB is also available.
- Integral four-band GSM module (850/900/1800/1900 MHz).
- Integral LCD display.
Signal power indicator.
- Display of mobile operator’s name.
- Flexible configuration: maximum call time, restriction of unwanted calls, SIM-card number identifier, CLI identifier, etc.
- Support of DTMF dialing
- Compatibility with main types of PABX.
- Easy to install and implement (Plug & Play).
- No need for additional technical support after implementation.
- Space saving dimensions: 210x120x45.
